Magic Numpad Serial Crack Codes

Magic Numpad Serial Crack Codes

DOWNLOAD - https://urlin.us/2t7Zpp

If you own a Samsung phone that was released after 2017, you can try the following secret codes on your device. Samsung Galaxy S8, S9, S10, S20, Galaxy Note 9, Note 10, Note 20, Galaxy A and M series, Galaxy Tab S series, etc. come into this category. Using the secret code, serial number, and IMEI, you can even check the manufacturing and activation date of your Samsung device.

See the Appendix for some tips on using Send(). AutoIt can send all ASCII and Extended ASCII characters (0-255). To send UNICODE characters you must use the "ASC" option and the code of the character you wish to send (see {ASC} at the bottom of the table below).The "Send()" command syntax is similar to that of ScriptIt and the Visual Basic "SendKeys" command. Characters are sent as written with the exception of the following characters:'!'This tells AutoIt to send an ALT keystroke, therefore Send("This is text!a") would send the keys "This is text" and then press "ALT+a".N.B. Some programs are very choosy about capital letters and ALT keys, i.e., "!A" is different from "!a". The first says ALT+SHIFT+A, the second is ALT+a. If in doubt, use lowercase!'+'This tells AutoIt to send a SHIFT keystroke; therefore, Send("Hell+o") would send the text "HellO". Send("!+a") would send "ALT+SHIFT+a".'^'This tells AutoIt to send a CONTROL keystroke; therefore, Send("^!a") would send "CTRL+ALT+a".N.B. Some programs are very choosy about capital letters and CTRL keys, i.e., "^A" is different from "^a". The first says CTRL+SHIFT+A, the second is CTRL+a. If in doubt, use lowercase!'#'The hash now sends a Windows keystroke; therefore, Send("#r") would send Win+r which launches the Run() dialog box.You can set SendCapslockMode to make CAPS LOCK disabled at the start of a Send() operation and restored upon completion.However, if a user is holding down the Shift key when a Send() function begins, text may be sent in uppercase.One workaround is to Send("{SHIFTDOWN}{SHIFTUP}") before the other Send() operations.Certain keyboards as the Czech keyboard sends different characters when using the Shift Key or with CAPS LOCK enabled while sending a character. Due to the send AutoIt implementation the CAPS LOCKed character will be sent as a Shifted character so it will not work.Certain special keys can be sent and should be enclosed in braces:N.B. Windows does not allow the simulation of the "CTRL-ALT-DEL" combination!Send() Command (if zero flag)Resulting Keypress{!}!{#}#{+}+{^}^{{}{{}}}{SPACE}SPACE{ENTER}ENTER key on the main keyboard{ALT}ALT{BACKSPACE} or {BS}BACKSPACE{DELETE} or {DEL}DELETE{UP}Up arrow{DOWN}Down arrow{LEFT}Left arrow{RIGHT}Right arrow{HOME}HOME{END}END{ESCAPE} or {ESC}ESCAPE{INSERT} or {INS}INS{PGUP}PageUp{PGDN}PageDown{F1} - {F12}Function keys{TAB}TAB{PRINTSCREEN}Print Screen key{LWIN}Left Windows key{RWIN}Right Windows key{NUMLOCK on}NUMLOCK (on/off/toggle){CAPSLOCK off}CAPSLOCK (on/off/toggle){SCROLLLOCK toggle}SCROLLLOCK (on/off/toggle){BREAK}for Ctrl+Break processing{PAUSE}PAUSE{NUMPAD0} - {NUMPAD9}Numpad digits{NUMPADMULT}Numpad Multiply{NUMPADADD}Numpad Add{NUMPADSUB}Numpad Subtract{NUMPADDIV}Numpad Divide{NUMPADDOT}Numpad period{NUMPADENTER}Enter key on the numpad{APPSKEY}Windows App key{LALT}Left ALT key{RALT}Right ALT key{LCTRL}Left CTRL key{RCTRL}Right CTRL key{LSHIFT}Left Shift key{RSHIFT}Right Shift key{SLEEP}Computer SLEEP key{ALTDOWN}Holds the ALT key down until {ALTUP} is sent{SHIFTDOWN}Holds the SHIFT key down until {SHIFTUP} is sent{CTRLDOWN}Holds the CTRL key down until {CTRLUP} is sent{LWINDOWN}Holds the left Windows key down until {LWINUP} is sent{RWINDOWN}Holds the right Windows key down until {RWINUP} is sent{ASC nnnn}Send the ALT+nnnn key combination{BROWSER_BACK}Select the browser "back" button{BROWSER_FORWARD}Select the browser "forward" button{BROWSER_REFRESH}Select the browser "refresh" button{BROWSER_STOP}Select the browser "stop" button{BROWSER_SEARCH}Select the browser "search" button{BROWSER_FAVORITES}Select the browser "favorites" button{BROWSER_HOME}Launch the browser and go to the home page{VOLUME_MUTE}Mute the volume{VOLUME_DOWN}Reduce the volume{VOLUME_UP}Increase the volume{MEDIA_NEXT}Select next track in media player{MEDIA_PREV}Select previous track in media player{MEDIA_STOP}Stop media player{MEDIA_PLAY_PAUSE}Play/pause media player{LAUNCH_MAIL}Launch the email application{LAUNCH_MEDIA}Launch media player{LAUNCH_APP1}Launch user app1{LAUNCH_APP2}Launch user app2{OEM_102}Either the angle bracket key or the backslash key on the RT 102-key keyboardTo send the ASCII value A (same as pressing ALT+065 on the numeric keypad) Send("{ASC 065}")(When using 2 digit ASCII codes you must use a leading 0, otherwise an obsolete 437 code page is used).To send UNICODE characters enter the character code (decimal or hex), for example this sends a Chinese character Send("{ASC 2709}") or Send("{ASC 0xA95}")Single keys can also be sent repeated: Send("{DEL 4}") ;Presses the DEL key 4 times Send("{S 30}") ;Sends 30 'S' characters Send("+{TAB 4}") ;Presses SHIFT+TAB 4 timesNo key is sent if the count is zero allowing the count to be set programatically: Send("{M " & $iCount & "}") ;Presses the M key as many times as set in the $iCount variableTo hold a key down Send("{a down}") ;Holds the A key down Send("{a up}") ;Releases the A keyTo set the state of the capslock, numlock and scrolllock keys Send("{NumLock on}") ;Turns the NumLock key on Send("{CapsLock off}") ;Turns the CapsLock key off Send("{ScrollLock toggle}") ;Toggles the state of ScrollLockIf you wish to use a variable for the count, try $n = 4 Send("+{TAB " & $n & "}")If you wish to send the ASCII value A four times, then try $x = Chr(65) Send("{" & $x & " 4}")Most laptop computer keyboards have a special Fn key. This key cannot be simulated.Note, by setting the flag parameter to 1 the above "special" processing will be disabled. This is useful when you want to send some text copied from a variable and you want the text sent exactly as written.For example, open Folder Options (in the control panel) and try the following:Send("{TAB}")Navigate to next control (button, checkbox, etc)Send("+{TAB}")Navigate to previous control.Send("^{TAB}")Navigate to next WindowTab (on a Tabbed dialog window)Send("^+{TAB}")Navigate to previous WindowTab.Send("{SPACE}")Can be used to toggle a checkbox or click a button.Send("{+}")Usually checks a checkbox (if it's a "real" checkbox.)Send("{-}")Usually unchecks a checkbox.Send("{NumPadMult}")Recursively expands folders in a SysTreeView32.Use Alt-key combos to access menu items. Also, open Notepad and try the following:Send("!f") Send() Alt+f, the access key for Notepad's file menu. Try other letters!Send("{DOWN}")Move down a menu.Send("{UP}")Move up a menu.Send("{LEFT}")Move leftward to new menu or expand a submenu.Send("{RIGHT}")Move rightward to new menu or collapse a submenu.When running a script on a remote computer through a program as psexec (www.sysinternals.com) or beyondexec (www.beyondlogic.org) it is necessary, specially when sending strokes to a program launch by the script with a Run() function, to use ControlSend() or other ControlXXX functions to directly communicate with the control. Send() even with Opt("SendAttachMode", 1) will not work.Using the -s mode when submitting can help to have better rights on the remote computer.Opt("SendKeyDelay",...) alters the the length of the brief pause in between sent keystrokes.Opt("SendKeyDownDelay",...) alters the length of time a key is held down before being released during a keystroke.Set both "SendKeyDelay" and "SendKeyDownDelay" to 0 to remove all delays when sending keystrokes. This may be required under certain circumstances, for example, when locking the system ("#l") it may be necessary to remove the delays in order to prevent the WIN key from being stuck down.

VIA implementation will enable bootmagic lite since it is practically essential. If the Esc key (or top left key) of the keyboard is not at matrix position (0,0), then explicitly set BOOTMAGIC_LITE_ROW and BOOTMAGIC_LITE_COLUMN in config.h. For consistency, it should be set to the top left key of the keyboard, even if this is not the Esc key (e.g. left side numpad keyboards, 40% and smaller keyboards, etc). Always test this works before submitting the PR to QMK. 2b1af7f3a8